| Wires and rods low- and medium alloyed | |
| Interweld SG 2 | Copper-coated solid wire designed for universal applications (joining and repair) |
| Interweld NiMoCr | Copper coated wire suitable for the welding of low alloy steels with high yield strength higher than 770 N/mm2 |
| Interweld A 290 (T) | For welding of steels with high tensile strength and for cold environments where a high tensile strength is required |
| Interweld A 291 (T) | Low alloyed molybdenum containing alloy to weld heat-resistant steels with an operating temperature up to 550°C. |
| Interweld A 294 (T) | Low alloyed chromium and molybdenum containing alloy to weld heat-resistant steels with an operating temperature up to 600°C. |
| Stainless steel wires and rods | |
| Interweld A 307 (T) | Austenitic Cr-Mn-Ni steel with low carbon contents to weld dissimilar steels (“black/white”) and hard to weld steels |
| Interweld A 308 (T) | Austenitic Cr-Ni steel (with some deltaferrit) with very low carbon contents to weld stainless austenitic steels and steel casts |
| Interweld A 309 (T) | Austenitic Cr-Ni steel to weld stainless and heat-resistant Cr- and Cr-Ni steels, steel casts and for joining dissimiliar steels. Cushion layers |
| Interweld A 309 Mo (T) | Austenitic Cr-Ni steel to weld stainless and heat-resistant Cr- and Cr-Ni steels, steel casts and for joining dissimiliar steels. Cushion layers |
| Interweld A 310 (T) | Austenitic Cr-Ni steel to weld heat- and oxidation-resistant steels, steel casts, ferritic steels and for joining dissimiliar steels. |
| Interweld A 316 (T) | Austenitic (with delta-ferrit) Cr-Ni-Mo steel with a very low carbon contents to weld stainless cryogenic austenitic steels |
| Interweld A 318 (T) | Austenitic, stabilised Cr-Ni-steel to weld stainless austenitic steels for operating temperatures up to 400°C. Good against wet corrosion. |
| Interweld A 347 (T) | Austenitic, stabilised Cr-Ni-steel to weld stainless austenitic steels for operating temperatures up to 400°C. Good against wet corrosion. |
| Interweld A 360 (T) | Austenitic-ferritic Cr-Ni-steel to weld dissimiliar steels and for hardfacing (either as cushion layer or as wear-resistant layer). |
| Interweld A 386 (T) | Nitrogen containing austenitic-ferritic Cr-Ni-Mo-steel to weld dissimiliar steels and stainless, ferritic-austenitic duplex-steels |
| Interweld A 388 (T) | Nitrogen containing austenitic-ferritic Cr-Ni-Mo-steel to weld stainless, ferritic-austenitic super duplex-steels. |
| Copper and Aluminium based wires and rods | |
| Interweld A 100 (T) | Tin-bronze alloy used for welding and overlaying of copper-tin alloys |
| Interweld A 101 (T) | Aluminium-bronze alloy used for welding and overlaying of copper-aluminium alloys |
| Interweld A 101 Ni (T) | Nickel-Aluminium-Bronze alloy used for joining and cladding of similar alloys and CuAl alloys |
| Interweld A 102 | Aluminium-bronze alloy with higher Fe contents used for welding and cladding of copper-aluminium alloys. |
| Interweld A 104 | Mn-Ni-Al-uminium-bronze alloy used for welding of cast alloys and alloys similiar to the weld-material composition and surfacing applications |
| Interweld A 110 (T) | Copper alloy used for welding of pure copper and weld-able coppers |
| Interweld A 111 (T) | Copper-silicon alloy used for welding of Cu-Si-; Cu-Zn alloys as well as for galvanized steel-sheet-metal. |
| Interweld A 500 (T) | Aluminium alloy used for welding of pure aluminium |
| Interweld A 505 (T) | Aluminium-silicon alloy used for welding of pure aluminium and aluminium-silicon alloys up to 7% Si |
| Interweld A 512 (T) | Aluminium-silicon alloy used for welding of aluminium-silicon alloys of more than 7% Si and for brazing aluminium sheets |
| Interweld A 513 (T) | Aluminium-magnesium alloy used for welding of aluminium alloys with maximum 3% Mg. |
| Interweld A 514 (T) | Aluminium alloy used for welding of tough aluminium alloys (alloyed with Mg, Mn, Cr,Zn). |
| Interweld A 515 (T) | Aluminium-magnesium alloy used for welding of aluminium alloys with maximum 5% Mg. |
| Nickel based wires and rods | |
| Interweld A 364 (T) | Ni-Cr-Fe alloy niobium stabilised for welding Ni-alloys, cryogenic Ni-alloys and to join dissimiliar materials like steels, copper-alloys, Ni-alloys etc |
| Interweld A 365 (T) | Ni-Cr-Mo alloy niobium stabilised (Type Inconel 625 ™ Inco) for welding similiar Ni-alloys |
| Interweld A 368 (T) | Ni-Cu alloy for welding Ni-Cu-alloys and to join Ni-, Ni-Cu-alloys, stainless and low-alloyed steels and surfacing |
| Interweld A 376 | NiCr alloy stabilized with niobium for cladding of low and high alloyed steels and for joining of dissimilar steels |
| Wires and rods for hard-facing | |
| Interweld A 600 (T) | Cr-Si-alloy for hard, tough and wear resistant hardfacings, machine-parts made of construction-steel, steel-cast or hard manganese steels. |
| Interweld A 601 T | TIG rod cobalt base type 1. Hardest Cobalt based alloy. |
| Interweld A 606 T | TIG rod cobalt base type 6. Very good resistance to metal-metal wear and to corrosion |
| Interweld A 612 T | TIG rod cobalt base type 12. Very good resistance to metal and mineral abrasion combined with corrosion |
| Interweld A 621 T | TIG rod cobalt base type 21. Very good resistance to metal-metal wear up to 1000°C |
| Interweld A 624 (T) | Cr-W-V-alloy for maintenance and production of new hot-working-tools (cutting tools, dies, pressing-dies, forging-hammers) |
| Interweld A 626 (T) | Cr-Mo-W-V-alloy for manufacturing tough, hard and wear-resistant hardfacings. For maintenance and production of hot-working-tools |
| Interweld A 632 (T) | Cr-Mo alloy for manufacturing tough, hard and wear-resistant hard-facings. For maintenance and production of hot-working-tools |
| Interweld A 634 (T) | Cr-Mo alloy for manufacturing tough, hard and wear-resistant hard-facings. For maintenance and production of hot-working-tools |
| Interweld A 636 (T) | Cr-Mo-W-V-alloy for manufacturing tough, hard and wear-resistant hardfacings. For maintenance and production of hot-working-tools |
| Interweld A 637 (T) | Cr-Mo alloy for tough, hard and wear-resistant hard-facings. Maintenance and production of hot-working-tools with medium hardness |
| Interweld A 650 (T) | Cr-Mo-V-alloy for hard, tough and heat resistant hardfacings. |
| Interweld A 653 (T) | Low Mn-Cr alloyed material for hardfacing of wear-resistant, machinable overlays |
| Interweld A 680 | Steel-Tube filled with coarse grain fused tungsten-carbide (granulation 0,5 mm) for hardfacing of low alloyed steels or steel cast |
| Interweld A 681 | Steel-Tube filled with coarse grain fused tungsten-carbide (granulation 1,0 mm) for hardfacing of low alloyed steels or steel cast |
| Interweld A 683 | Steel-Tube filled with coarse grain fused tungsten-carbide (granulation 2,0 – 2,3 mm) for hardfacing of low alloyed steels or steel cast |
| Interweld A 690 | Flexible rod with a NiCrBSi matrix and a high percentage of fused tungsten-carbides for hardfacing of wear-resistant parts |
| Interweld A 691 | Flexible rod with a NiCrBSi matrix and a high percentage of fused tungsten-carbides for hardfacing of wear-resistant parts |
| Interweld A 696 | Nickel-silver matrix (copper based) with a high percentage of coarse, cemented tungsten-carbide grit |
| Interweld AS-C | Copper-coated solid wire for submerged-arc welding. |
| Interweld AS-D | Solid wire for submerged arc welding. Used for hard wear-resistant hard-facings |
