Wires and rods low- and medium alloyed
Interweld SG 2 Copper-coated solid wire designed for universal applications (joining and repair)
Interweld NiMoCr Copper coated wire suitable for the welding of low alloy steels with high yield strength higher than 770 N/mm2
Interweld A 290 (T) For welding of steels with high tensile strength and for cold environments where a high tensile strength is required
Interweld A 291 (T) Low alloyed molybdenum containing alloy to weld heat-resistant steels with an operating temperature up to 550°C.
Interweld A 294 (T) Low alloyed chromium and molybdenum containing alloy to weld heat-resistant steels with an operating temperature up to 600°C.
   
Stainless steel wires and rods
Interweld A 307 (T) Austenitic Cr-Mn-Ni steel with low carbon contents to weld dissimilar steels (“black/white”) and hard to weld steels
Interweld A 308 (T) Austenitic Cr-Ni steel (with some deltaferrit) with very low carbon contents to weld stainless austenitic steels and steel casts
Interweld A 309 (T) Austenitic Cr-Ni steel to weld stainless and heat-resistant Cr- and Cr-Ni steels, steel casts and for joining dissimiliar steels. Cushion layers
Interweld A 309 Mo (T) Austenitic Cr-Ni steel to weld stainless and heat-resistant Cr- and Cr-Ni steels, steel casts and for joining dissimiliar steels. Cushion layers
Interweld A 310 (T) Austenitic Cr-Ni steel to weld heat- and oxidation-resistant steels, steel casts, ferritic steels and for joining dissimiliar steels.
Interweld A 316 (T) Austenitic (with delta-ferrit) Cr-Ni-Mo steel with a very low carbon contents to weld stainless cryogenic austenitic steels
Interweld A 318 (T) Austenitic, stabilised Cr-Ni-steel to weld stainless austenitic steels for operating temperatures up to 400°C. Good against wet corrosion.
Interweld A 347 (T) Austenitic, stabilised Cr-Ni-steel to weld stainless austenitic steels for operating temperatures up to 400°C. Good against wet corrosion.
Interweld A 360 (T) Austenitic-ferritic Cr-Ni-steel to weld dissimiliar steels and for hardfacing (either as cushion layer or as wear-resistant layer).
Interweld A 386 (T) Nitrogen containing austenitic-ferritic Cr-Ni-Mo-steel to weld dissimiliar steels and stainless, ferritic-austenitic duplex-steels
Interweld A 388 (T) Nitrogen containing austenitic-ferritic Cr-Ni-Mo-steel to weld stainless, ferritic-austenitic super duplex-steels.
   
Copper and Aluminium based wires and rods
Interweld A 100 (T) Tin-bronze alloy used for welding and overlaying of copper-tin alloys
Interweld A 101 (T) Aluminium-bronze alloy used for welding and overlaying of copper-aluminium alloys
Interweld A 104 Mn-Ni-Al-uminium-bronze alloy used for welding of cast alloys and alloys similiar to the weld-material composition and surfacing applications
Interweld A 110 (T) Copper alloy used for welding of pure copper and weld-able coppers
Interweld A 111 (T) Copper-silicon alloy used for welding of Cu-Si-; Cu-Zn alloys as well as for galvanized steel-sheet-metal.
Interweld A 500 (T) Aluminium alloy used for welding of pure aluminium
Interweld A 505 (T) Aluminium-silicon alloy used for welding of pure aluminium and aluminium-silicon alloys up to 7% Si
Interweld A 512 (T) Aluminium-silicon alloy used for welding of aluminium-silicon alloys of more than 7% Si and for brazing aluminium sheets
Interweld A 513 (T) Aluminium-magnesium alloy used for welding of aluminium alloys with maximum 3% Mg.
Interweld A 514 (T) Aluminium alloy used for welding of tough aluminium alloys (alloyed with Mg, Mn, Cr,Zn).
Interweld A 515 (T) Aluminium-magnesium alloy used for welding of aluminium alloys with maximum 5% Mg.
   
Nickel based wires and rods
Interweld A 364 (T) Ni-Cr-Fe alloy niobium stabilised for welding Ni-alloys, cryogenic Ni-alloys and to join dissimiliar materials like steels, copper-alloys, Ni-alloys etc
Interweld A 365 (T) Ni-Cr-Mo alloy niobium stabilised (Type Inconel 625 ™ Inco) for welding similiar Ni-alloys
Interweld A 368 (T) Ni-Cu alloy for welding Ni-Cu-alloys and to join Ni-, Ni-Cu-alloys, stainless and low-alloyed steels and surfacing
   
Wires and rods for hard-facing
Interweld A 600 (T) Cr-Si-alloy for hard, tough and wear resistant hardfacings, machine-parts made of construction-steel, steel-cast or hard manganese steels.
Interweld A 601 T WIG rod type Stellit 1 (Ô of Haynes International). Hardest Cobalt based alloy.
Interweld A 606 T WIG rod type Stellit 6 (Ô of Haynes International). Very good resistance to metal-metal wear and to corrosion
Interweld A 612 T WIG rod type Stellit 12 (Ô of Haynes International). Very good resistance to metal and mineral abrasion combined with corrosion
Interweld A 621 T WIG rod type Stellit 21 (Ô of Haynes International). Very good resistance to metal-metal wear up to 1000°C
Interweld A 624 (T) Cr-W-V-alloy for maintenance and production of new hot-working-tools (cutting tools, dies, pressing-dies, forging-hammers)
Interweld A 626 (T) Cr-Mo-W-V-alloy for manufacturing tough, hard and wear-resistant hardfacings. For maintenance and production of hot-working-tools
Interweld A 632 (T) Cr-Mo alloy for manufacturing tough, hard and wear-resistant hard-facings. For maintenance and production of hot-working-tools
Interweld A 634 (T) Cr-Mo alloy for manufacturing tough, hard and wear-resistant hard-facings. For maintenance and production of hot-working-tools
Interweld A 636 (T) Cr-Mo-W-V-alloy for manufacturing tough, hard and wear-resistant hardfacings. For maintenance and production of hot-working-tools
Interweld A 637 (T) Cr-Mo alloy for tough, hard and wear-resistant hard-facings. Maintenance and production of hot-working-tools with medium hardness
Interweld A 650 (T) Cr-Mo-V-alloy for hard, tough and heat resistant hardfacings.
Interweld A 653 (T) Low Mn-Cr alloyed material for hardfacing of wear-resistant, machinable overlays
Interweld A 680 Steel-Tube filled with coarse grain fused tungsten-carbide (granulation 0,5 mm) for hardfacing of low alloyed steels or steel cast
Interweld A 681 Steel-Tube filled with coarse grain fused tungsten-carbide (granulation 1,0 mm) for hardfacing of low alloyed steels or steel cast
Interweld A 683 Steel-Tube filled with coarse grain fused tungsten-carbide (granulation 2,0 – 2,3 mm) for hardfacing of low alloyed steels or steel cast
Interweld A 690 Flexible rod with a NiCrBSi matrix and a high percentage of fused tungsten-carbides for hardfacing of wear-resistant parts
Interweld A 691 Flexible rod with a NiCrBSi matrix and a high percentage of fused tungsten-carbides for hardfacing of wear-resistant parts
Interweld A 696 Nickel-silver matrix (copper based) with a high percentage of coarse, cemented tungsten-carbide grit
Interweld AS-C Copper-coated solid wire for submerged-arc welding.
Interweld AS-D Solid wire for submerged arc welding. Used for hard wear-resistant hard-facings